[zwood04]

Mounted mine last night, just finishing the wiring tonight or tomorrow. Happy I went this route it'll be great to have visibility out back all the time. The pics attached are just roughed in, still have some finalizing/wiring to do. She's solid and doesn't move once tightened down. View attachment 2480 View attachment 2482

What mounting bracket did you have to order to attach it to your cage? Thanks

 

[zwood04]

You referring to the monitor? If so, a pipe hangar. One with a cover over it, don't recall the size of it though. 2.25 or 2.5" iirc.

Similar to below, be sure it'll fit your cage.

Oatey 3 in. Galvanized DWV Pipe Hanger

Oatey 3 in. Galvanized DWV Pipe Hanger 33566 - The Home Depot

Give an essential addition to your plumbing work with this reliable Oatey Galvanized DWV Pipe Hanger.

www.homedepot.com

SKU# 301505403



Sent from my SM-N975U using Tapatalk

Interesting, so those hangers bolt to the back of the monitor? Its hard to imagine without the monitor and hangers? Thanks

 

[zwood04]

So I cut off let's say 6 inches above the circle part, then ran bolts and spacers into the back of the monitor housing. If I remember correctly the monitor had a mount with some threaded holes in the back. Don't exactly remember how it was laid out, however it all makes sense once you get the brackets. Then tighten the brackets down onto the roll cage. Was pretty straightforward once you get it all together.

Sent from my SM-N975U using Tapatalk

OK, that helps, thanks, I'm going to give it a shot.