Honda Talon 1000 News
The latest news coverage for the 2019+ Honda Talon 1000
Honda Talon 1000 Forum
TalonSxSForum.com — For everything you need to know about the 2019+ Honda Talon 1000!
Honda Talon 1000 Ownership Lounge
2019+ Honda Talon 1000 Pricing, Orders, Availability and Dealership Experiences
Honda Talon 1000 Tech Section
All Technical And Performance Topics For The 2019+ Honda Talon 1000
Marketplace
Vendor Member Section
Want to Grow Your Business? Learn more about becoming a Supporting or Premium Vendor
Latest Posts
-
Engine And Technical DiscussionI have a OEM front lower A-Arm bushing on my 2019 Talon X that is bad and causing a rattle. I bought the SuperATV UHMW to replace them. If I do not plan to keep original OEM bushings do I need to remove the C-clip? Can I press them out without removing the clip, or is there an easy way to remove...
- 2
- 121
-
Fusefinder · updated
-
2019+ Honda Talon 1000 NewsBesides offset a-arms, is there a way to keep 32" tires from rubbing in the front? I don't want spacers on the front because I don't want to be wider. Will a lift do it? My thought is no. I appreciate any and all feedback!!
- 6
- 493
-
Wheel And TiresSo this is a simple question that I can not find a definite answer to. What is the largest tire that can be put on the Honda Talon X with stock rims, stock A-arms, and stock suspension? I have heard alot about 32 inch tires "slightly" rubbing. I am looking at purchasing 31x10x15 inch STI Out &...
- 30
- 39K
-
aarondvm46 · updated
-
Honda Talon 1000 General Discussion ForumWintering in the Arizona desert, dust on the trails is breathtaking. The downward exhaust on the Talon stirs up dust even greater. This week I removed the exhaust tip and redrilled the three bolt holes to aim the exhaust at a 45* angle as pictured. I made a template of the mounting holes and...
- 8
- 2K
-
Honda Talon 1000 General Discussion ForumI was at the hunting land riding around for a while. No mud mostly dirt roads. as i was going down a trail the over heat light cam on and i cut it off. when i turned the key to on position there was a lot of clicking coming from the back end and would not start. After trying for several...
- 4
- 761
