Honda Talon Forum banner
1 - 4 of 4 Posts

· Super Moderator
Joined
·
351 Posts
Discussion Starter · #1 · (Edited)
Get more ground clearance with our 2" lift. You can run up to a 29' tire with the stock wheels, or even bigger with wheel spacers or aftermarket wheels for even more ground clearance!

Here's a link: Talon 1000X 2" Lift Kit

Pictured here with 34" Warrior RT tires and our 5+2 beadlocks.

 

· Registered
Joined
·
129 Posts
I'm looking at your 2-3” lift kit right now.
Always liked the idea of running a size bigger than 29" although its an ideal mild size.
For anyone also interested:

2-3” of Lift Gives You More Clearance
Get SuperATV’s 2-3” lift kit for your Honda Talon 1000R and up your riding game. Our true 2-3” lift kit gives you more clearance to get wild. With a max tire size of up to 37” when using a 1.5” wheel spacer, you can take bigger rocks and ride through rougher creeks. Are you ready change the way your ride?
 

· Super Moderator
Joined
·
351 Posts
Discussion Starter · #3 ·
I'm looking at your 2-3” lift kit right now.
Always liked the idea of running a size bigger than 29" although its an ideal mild size.
For anyone also interested:
The 29" limitation is in the rear. The stock wheels have a pretty wild offset. If you run a 2" wheel spacer you can run some pretty big tires. We have a 34"s on the Talon in the 2" lift pic on our website.
 

· Premium Member
Joined
·
1,119 Posts
I'm looking at your 2-3” lift kit right now.
Always liked the idea of running a size bigger than 29" although its an ideal mild size.
For anyone also interested:
Did you install the lilt kit and how is it working? I am thinging on installina the SuperATV 2" lift kit on my 1000x and wanted feedback. Did you have to use a spring compressor?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top