Honda Talon Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I replaced the stock wheels and tires on my R 2-seat live valve with a set of ITP Cyclone 15” wheels and System3 XTR370 30” tires.

There is no offset.

Can I run with the “straight” set up or should I add spacers to the front or rear?
 

·
Registered
Joined
·
391 Posts
I replaced the stock wheels and tires on my R 2-seat live valve with a set of ITP Cyclone 15” wheels and System3 XTR370 30” tires.

There is no offset.

Can I run with the “straight” set up or should I add spacers to the front or rear?
If you run the same offset front/rear, it is your choice to even out the width with 1.5" spacers in the rear . Depends on your riding.

Narrower rear (no spacers) makes the machine slightly oversteer and is advantageous in tight trail and desert riding.
Running spacers in the rear to even it up has advantages in off camber situations and dunes.
 
1 - 2 of 2 Posts
Top