[MarcFo]

I picked up a NIB plow and push arms for a Pioneer and am going to install on the Talon. I don't think Honda has a mounting bracket out yet (unless I just couldn't find one!) for the Talon. If anyone has the Pioneer bracket, I need to know the diameter of the piece shown below:

I'll need to modify my KFI plow mount.

 

[PaulF]

You didn't say what brand you bought but Denali has a mount for the Talon...

DENALI UTV Plow Mount Plate - Honda Talon

<b>DENALI</b> UTV Snow Plow Mount for Honda Talon is made of steel and includes mounting hardware. Used with DENALI UTV Snow Plow Kits

www.motoalliance.com

 

[MarcFo]

You didn't say what brand you bought but Denali has a mount for the Talon...

DENALI UTV Plow Mount Plate - Honda Talon

<b>DENALI</b> UTV Snow Plow Mount for Honda Talon is made of steel and includes mounting hardware. Used with DENALI UTV Snow Plow Kits

www.motoalliance.com

Oh man sorry, the plow is a Honda OEM plow and push arms for a Pioneer 1000. I have a KFI mount for my Talon that I am modifying.

 

[PaulF]

Instructions at https://cdn.powersports.honda.com/documentum/MW01/08L75-HL4-A02.pdf say 10mm but do not indicate what pitch...

 

[MarcFo]

Thanks for the replies, I ended up using 3/4" round stock, drilling out the holes in the KFI plate and welding the round stock in place. So far so good, but was not able to put it in the snow last night.

The push arms are a bit short for the Talon, I'm guessing there would be more room on a Pioneer.

 

[pcgeek86]

I use a KFI mount on my Pioneer 500 and Talon 1000R, and can interchange the push tube / plow between the two units.

DO NOT buy the KFI flex blade, as it will bend, and you'll end up wasting a ton of money on your blade. The flex blades are absolute crap. I wish I had never purchased one.

 

[Kooch]

I use a KFI mount on my Pioneer 500 and Talon 1000R, and can interchange the push tube / plow between the two units.

DO NOT buy the KFI flex blade, as it will bend, and you'll end up wasting a ton of money on your blade. The flex blades are absolute crap. I wish I had never purchased one.

Do you mean their poly blade?