Joined
·
1 Posts
Does anyone else have a problem with the Talon not going into 4 wheel drive all the time. It does once in a while.
not going into 4 wheel drive
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
Outside Air Intake & Pre-Filter
Engine And Technical DiscussionSo, in my mind there is no perfect solution for this. The reason I am posting this is to get input from other members seeking a good/better solution. Each solution has some advantages, and for sure they all have their disadvantages. Remember, these are just my opinions, I am not putting them out...- 16
- 303
-
Frame problems
Engine And Technical DiscussionI have a 2020 1000R. Only have 140 miles on it. Went riding this past weekend and nothing crazy at all just road hard. Well after cleaning it up I noticed that my front lower a-arm was pushed backwards and as I first looked I though a rock might of hit it. After more looking it wasn’t, but was...- 39
- 1K
-
Jacob · updated
-
An alternative to Particle separators, Snorkels or other Pre Filters
Engine And Technical DiscussionFor an easy “Pre-Filter” fix I use a Uni offset filter underneath the stock filter. There is no difference in noise and I’ve noticed no difference in performance. I cleaned it the first time after I had about 245 miles on it and at that time the factory filter looked brand new. These pictures...- 18
- 1K
-
River · updated
-
Is honda talon 100 mile valve adjustment necessary?
Engine And Technical DiscussionHello all, I just got a little over 100 miles on my 2020 Honda talon 1000 X. I was going to do the first service. It says you are supposed to inspect valve clearance. The dealer made it sound like they absolutely have to pull the valve cover and inspect with feeler gauge. In the owner’s...- 1
- 146
-
Low Range Clank, Shift Gate modification, Sub-transmission failure
Engine And Technical DiscussionHey, In order to avoid a damaging low-range shift (when stopped), I have found this to work pretty well. I believe the real problem is the cable slop in compression. Therefore, I chose not to buy an aftermarket shift gate, because it will still require adjustment and potential modification...- 36
- 985
Join now to ask and comment!