[beez3311]

Does anyone know how much nitrogen to put in shocks front and rear on 2019 talon x?

 

[Anfrz]

200psl on an 1000R would assume it same

 

[nm6r]

I can assure you the pressure for stock shocks on a Talon 1000X or a 1000R is not 200psi. As a matter of fact, the correct nitrogen pressure for a 1000R is 100psi on the fronts and 140 or 150psi on the rear (depending on p/n).

Call Fox (831-274-6500 ext. 6520) with the Honda part numbers off the bottom of your shocks to find out what is right for your stock 1000X shocks.

 

[MasterSheep89]

I filled mine with 200 PSI. Rides much better. When i drilled out the factory shocks barely anything came out. I have read they are around 75 PSI from the factory. 200 PSI made a noticable difference.

 

[beez3311]

I called fox and they told me 100 psi front and rear. I had one front and one rear that the clicker just turned without clicking into one of the three settings. I got them filled and one leaked again the next day. The other one is holding nitrogen. I will be replacing the caps.