Honda Talon Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter #1
I bought two small 4" LED flood lights to mount on the front of our Talon, they will each point off to the sides at about a 45 degree angle to illuminate the sides of the road so that when you are out at night and driving on a road you may not be familiar with you can see any rocks, stumps, trees, or cliffs that you are about to hit or run off of if you turn that way! I would like to just wire them into the wire that goes to each high beam side of the head lights so they come on when you switch to the high beams. I have heard that the LED lights do not draw much amperage so that it should not be a problem. I'm trying to keep the wiring of these lights simple, and they would go off when you turn off the lights or shut the machine off. Then I don't have to remember to turn them off. Any advice?
 

·
Registered
Joined
·
168 Posts
Splice them in, led’s are low watts and should be just fine. I did it on many machines over the years - no problems.
 
1 - 4 of 4 Posts
Top