Honda Talon Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Installed my custom air intake and a pre-filter with Outerwear cover. All tubing and connectors are Spectre brand purchased from JEGS and Amazon. Filter is a UNI two stage. I change out the UNI with a clean one every 4 or five rides.
772
773
774
 

·
Registered
Joined
·
8 Posts
Installed my custom air intake and a pre-filter with Outerwear cover. All tubing and connectors are Spectre brand purchased from JEGS and Amazon. Filter is a UNI two stage. I change out the UNI with a clean one every 4 or five rides.

Looks great! Got links or sizes to the tubing and connectors?
 

·
Registered
Joined
·
2 Posts
Discussion Starter #7
Looks great! Got links or sizes to the tubing and connectors?
Below fender, starting at the air box.
All tubing is 3” OD
Spectre #86681 60 degree elbow
Spectre #9475 Flex Coupler
Spectre #87081 4” long tube
Spectre #8771 Black Coupler
Spectre #87281 22 degree elbow
Spectre #9475 Flex Coupler through fender
Above fender
Spectre #87281 22 degree elbow
Spectre #8718 6” long tube with coupler
Spectre #87726 Blue coupler also comes in black or red
Spectre #94990 90 degree aluminum elbow
Aluminum elbow is clamped to roll bar with a Total Flow #TF-JB604 muffler clamp and two Tusk horizontal flag mounts.
Filter is anything that will fit a 3” tube
 
1 - 7 of 7 Posts
Top